Carbon In Tool Steel





Carbon tool steel, or tool steel as it is commonly called, usually

contains from 80 to 125 points (or from 0.80 to 1.25 per cent)

of carbon, and none of the alloys which go to make up the high

speed steels. This was formerly known also as crucible or cast

steel, or crucible cast steel, from the way in which it was made.

This was before the days of steel castings. The advent of these

caused so much confusion that the term was soon dropped. When we

say tool steel, we nearly always refer to carbon-tool steel,

high-speed steel being usually designated by that name.



For many purposes carbon-steel cutters are still found best, although

where a large amount of material is to be removed at a rapid rate,

it has given way to high-speed steels.





Calibration Of Pyrometer With Common Salt Carbon Steels For Different Tools facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback