Xlf.ca - Samurai and Code of Honor. Visit Xlf.caInformational Site Network Informational
Privacy
   Home - Steel Making - Categories - Manufacturing and the Economy of Machinery

Steel Making

Heat Treatment Of Punches And Dies Shears Taps Etc
HEATING.--The degree to which tools of the above classes shou...

Crucible Steel
Crucible steel is still made by melting material in a clay or...

Placing Of Pyrometers
When installing a pyrometer, care should be taken that it re...

Tungsten
Tungsten, as an alloy in steel, has been known and used for a...

Chrome-nickel Steel
Forging heat of chrome-nickel steel depends very largely on ...

Introduction Of Carbon
The matter to which these notes are primarily directed is the...

Annealing Method
Forgings which are too hard to machine are put in pots with ...

Temperatures To Use
As soon as the temperature of the steel reaches 100 deg.C. (...

Carburizing Low-carbon Sleeves
Low-carbon sleeves are carburized and pushed on malleable-ir...

Preventing Decarbonization Of Tool Steel
It is especially important to prevent decarbonization in such...

Quenching Tool Steel
To secure proper hardness, the cooling of quenching of steel ...

Carbon-steel Forgings
Low-stressed, carbon-steel forgings include such parts as car...

Hardening
The forgings can be hardened by cooling in still air or quen...

High-carbon Machinery Steel
The carbon content of this steel is above 30 points and is ha...

Instructions For Working High-speed Steel
Owing to the wide variations in the composition of high-speed...

Highly Stressed Parts
The highly stressed parts on the Liberty engine consisted of ...

The Effect
The heating at 1,600 deg.F. gives the first heat treatment w...

Furnace Data
In order to give definite information concerning furnaces, fu...

Process Of Carburizing
Carburizing imparts a shell of high-carbon content to a low-...

Preventing Cracks In Hardening
The blacksmith in the small shop, where equipment is usually ...
















You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '= 1' at line 1